Then Elliot remembered some old boards that used to be used for getting cars up onto trailers... And decided they could be sacrificed as a hot tub top!
We cut the edges at 45° angle and screwed and glued them together using strong wood glue which was left overnight to cure
Once securely glued into one piece, the surfaces were sanded to give the same rustic sort of finish as the cladding
This little hole was filled in... 👌 (Not really sure why this is in here but Elliot was proud of it!)
The edges were cut to form those beautiful curves...
Would make a good picture frame... huh? 😁
Curves were also cut on the inside edges with the jigsaw.
And the inside was also sanded...
The top edge was secured to the rest of the build by way of brackets mounted hidden behind the cladding.
I was looking for this kind of posts and this post is too good. Thanks for the post and keep updating.
ReplyDeleteHot Tub